Why Laser tube cutting machine nozzle is heating causes and how to solve

The use of laser automatic pipe cutting machine nozzle will have a great impact on the laser beam. In order to avoid the impact of using nozzle, laser pipe cutting machine manufacturers Ande laser will introduce the causes of the laser pipe cutting machine nozzle heat and how to solve it!

Nozzle on the impact of laser automatic pipe cutting machine cutting: the size of the nozzle only allows the beam to pass, in order to avoid direct contact between the laser beam and the nozzle in the hole, it is obvious that the internal diameter of the nozzle will be reduced, the more difficult the beam collimation, the nozzle sprayed with auxiliary gas is required to remove the slit within the molten product and strengthen the effective coupling of cutting action.

Laser tube cutting machine nozzle heating causes.

1, the laser nozzle cooling air (cooling water) open or not? Whether to meet the requirements.

2, the laser focus optical path may have shifted, part of the laser irradiation to the nozzle.

3, laser nozzle aperture part of the blockage, or pollution. Laser pipe cutting machine nozzle heat, you can take the following measures to solve respectively

To solve the laser pipe cutting machine nozzle fever approach

1, check whether the cooling air is open, not open, open.

2, check whether the focus is correct, incorrectly adjusted.

3, check whether the nozzle is blocked, blocked on the cleaning.

4, do not work continuously for a long time, regularly let the equipment cool down.

Laser tube cutter manufacturer Anders Laser Intelligent Equipment (Guangdong) Limited is a collection of research and development, production, sales in one of the laser equipment manufacturers, the main Laser cutting machine, laser tube cutter, Laser welding machine, Laser marking machine and other series of equipment, welcome all walks of life to consult and buy.

This article is partly collated from the network sharing, if there is infringement, please contact me to delete.