Operation process of fiber laser cutting machine

With the continuous advancement of laser technology, laser equipment is more and more widely used in life. While using laser cutting to bring convenience to people, it also brings greater economic benefits to enterprises. The correct use of the Laser cutting machine is very important for prolonging the life of the equipment and improving the working efficiency of the machine. Let me share with you the start-up operation process of the fiber laser cutting machine:

(1) Determine the material to be processed, fix the sheet metal material on the machine tool, and then determine the stability of the material placement, so as to avoid jitter during the cutting process, resulting in the cutting accuracy not meeting the requirements.

(2) Adjust the auxiliary gas for cutting: select the auxiliary gas for cutting according to the material to be processed, and adjust the pressure of the cutting gas according to the material and thickness. To ensure that cutting cannot be performed when the air pressure is lower than a certain value, so as to prevent the processing parts from being scrapped and the focusing lens from being damaged.

(3) Operate the console, enter the product cutting pattern, and the cutting material thickness and other parameters, adjust the cutting head to the appropriate focus position, and then reflect and adjust the nozzle center.

(4) Start the voltage stabilizer and the chiller, set and check whether the water temperature and water pressure are normal, and whether they match the water pressure and water temperature required by the laser.

(5) Start the laser, and then turn on the machine tool for processing. During the processing, observe the cutting situation at any time. If there is a possible collision of the cutting head, the cutting must be suspended in time. After the danger is eliminated, the cutting will continue.

Although the above five points are very brief, it takes a lot of time to practice in the actual operation process to get familiar with each operation detail.

In addition, after the fiber laser cutting machine is used, the machine needs to be shut down to reduce fiber laser failure and increase the service life of the machine. The specific operations are as follows:

(1) Turn off the laser.
(2) Turn off the chiller.
(3) Turn off the gas and exhaust the gas in the pipeline.
(4) Raise the Z axis to a safe height, turn off the CNC system, and seal the nozzle with transparent glue to prevent dust from polluting the lens.
(5) Clean up the site and record the operation of the cutting machine on the day. If any failure occurs, record it in time so that the maintenance personnel can diagnose and repair it.

The above is about the "Fiber Laser Cutting Machine Start-up Operation Process" related content, I hope it will be helpful to everyone!

The above is the start-up operation process of the fiber laser cutting machine. If you have other questions, you can consult our professional customer service of Ande Laser. Ande Laser Intelligent Equipment (Guangdong) Co., Ltd. is a laser equipment manufacturer integrating R&D, production and sales. Its main products: laser cutting machines, laser marking machines, laser welding machines and laser equipment peripheral automation, etc. The series, involving more than 100 kinds of industrial laser equipment and its supporting products, look forward to your cooperation and understanding.



Disclaimer: This article is written or reprinted for the purpose of conveying more information, and doing some small work for the laser industry. If the text or picture violates your legal rights or improper, please contact us, we will coordinate and deal with it.