Why does the saw tooth appear in the cutting process?

       Metal laser cutting machineis used frequently in the sheet metal processing industry. It has the characteristics of good cutting effect and high cutting surface smoothness, and is deeply loved by the sheet metal processing industry. The popularization and promotion of metal laser cutting machines  are inseparable from the technological improvement of major laser equipment manufacturers. Good equipment manufacturing technology and high-end brand accessories are the guarantee of the quality of the laser cutting machine. In daily processing and production, there will be various problems, such as sawtooth in the process of laser cutting machine processing, so why does this happen? Today, the laser cutting manufacturer Ande Laser will have a specific talk with you.

1. Machine tool parallelism

           If the parallelism of the laser cutting machine is installed improperly, the equipment will be unstable during the processing process, vibration will occur, and the cross section of the processed material will have sawtooth.

           There are two kinds of vibrations in a metal laser cutting machine. One is the vibration of the equipment itself during cutting, which affects the cutting effect. The second is the problem of external equipment, such as exhaust fans, water tanks, etc. It is easy to cause the equipment to vibrate.

2. Rail installation is not parallel

           Sometimes the Y-direction guide rails are not installed in parallel, and the equipment will get stuck during processing, so the cutting section may also have serrations.

3. Gear related aspects

           When the gear seat slips, it will also cause the machining section to be jagged.

4. Improper lens fixation

       When the lens is not fixed properly, the lens will shake when the device is running, the beam will also vibrate, and the final cut part will appear jagged. During long-term use of the metal laser cutting machine, the slider will wear out and there will be foreign objects in the inner ball, which will cause the guide rail to vibrate during the working process, and there will be sawtooth problems after processing. When we see a jagged problem on a metal laser cutting machine, we can hold the laser head with our hands to prevent it from shaking. If there is no sawtooth problem after pressing it by hand, it must be a slider problem; if it still occurs, you need to check belts, gears and other accessories. If this kind of problem occurs in the new processing, you must consider whether it is installed improperly or its control drive does not match the motor.

           The above is part of the situation listed by Ande Laser based on experience. If there are other situations that have not been mentioned, please communicate with us. Ande Laser Intelligent Equipment (Guangdong) Co., Ltd. is a laser that integrates R&D, production and sales. Equipment manufacturer, main products: laser cutting machine, laser marking machine, laser welding machine and laser equipment peripheral automation and other series, involving more than 100 kinds of industrial laser equipment and supporting products, comprehensive control of product quality, multiple The series of products have obtained the EU CE certification, and we look forward to your cooperation and understanding.

       (Part of the content of this article is compiled from the network sharing. If there is any infringement, please contact the editor to delete it.)