Functions to improve processing efficiency and cutting performance of laser cutting machines

Today, the Laser cutting machine manufacturer Ande Laser will talk to you about the practical functions in the cutting process. With these practical functions, the processing efficiency and cutting performance of the laser cutting machine can be greatly improved.

1. Leapfrog
Leapfrog is an empty way of laser cutting machine. After hole 1 is cut, hole 2 needs to be cut next. The cutting head is to move from point A to point B. Of course, the laser should be turned off during the movement. During the movement process from point A to point B, the machine runs "empty", which is called empty travel. The empty travel of the early laser cutting machine is shown in the figure below, and the cutting head has to complete three actions in sequence: rising (to a safe enough height), translation (reaching above point B), and descending. Compressing idle time can improve the efficiency of the machine. If the three actions completed sequentially are completed "simultaneously", the idle time can be shortened: when the cutting head moves from point A to point B, it rises at the same time; when it approaches point B, it descends at the same time. The trajectory of the cutting head's empty motion is like an arc drawn by a frog jumping.

In the development of laser cutting machines, leapfrog can be regarded as an outstanding technological progress. Leapfrog action only takes up the translational time from point A to point B, saving the time for rising and falling. When the frog jumps, it catches the food; when the laser cutting machine jumps, what it "catches" is high efficiency. If the laser cutting machine does not have the leapfrog function, I am afraid it will not be popular.

2. Automatic edge finding
When the sheet is placed on the table, if it is skewed, it may cause waste when cutting. If the inclination angle and origin of the sheet can be sensed, the cutting process can be adjusted to suit the angle and position of the sheet, thereby avoiding waste. The automatic edge finding function came into being.

After starting the automatic edge finding function, the cutting head starts from point P, and automatically measures 3 points on the two vertical sides of the sheet: P1, P2, P3, and automatically calculates the inclination angle A of the sheet, and the angle of the sheet. origin. With the help of the automatic edge finding function, it saves the time of adjusting the workpiece earlier - it is not an easy task to adjust (move) the workpiece weighing hundreds of kilograms on the cutting table, and improves the efficiency of the machine.

A high-power laser cutting machine with advanced technology and powerful functions is a complex system integrating light, machinery and electricity. The subtleties often hide the mysteries. Let us peek into its mysteries together.

Ande Laser Intelligent Equipment Co., Ltd., as one of the leading manufacturers of Laser cutting machine in China. We are professionals in Laser Cutting Machine, Laser welding machine and Laser marking machine. For more information, please contact us:
Tel:86-750-3582689
Mobile Phone:+8618675044386
Email:user2@ande-laser.com